Quote list0
Your product list is empty!

Animal
Mouse, Rat

Analgesy-Meter and Upgrade Kit for Rats

Product Code:37215-BUNDLE

Measures the force on a rat or mouse paw according to the Randall-Selitto paw-pressure test, it enables rapid and precise screening of analgesic drugs for anti-nociceptive studies, in healthy or inflamed limbs. The device applies a steady increasing force, starting and stopping using the foot pedal. No calibration required. Digital model with force sensors and electronic unit is also available.

Exerts a steadily increasing force with easy start and stop. No calibration required. Design maximises care for animals. Model with digital reading available.

Model
An extended warranty can be added for most Ugo Basile products. You can find this information in the ordering information section of each product.
To learn more about the extended warranty, CLICK HERE

Background

  • Current model based on over 50 years of expertise and continuous product development.
  • Assesses the force at which the animal feels pain.
  • Typically, the Randall-Selitto method is used as a rapid and sensitive screening of analgesic and anti-inflammatory drugs.
  • Rat/mouse and mouse models available with 3 different force ranges.
  • More than 1000 published papers citing Ugo Basile.

Rapid and precise screening of analgesic drugs

  • Gradually increases pressure on an inflamed animal paw until the animal makes a flinch response.
  • The force can be continuously monitored by a pointer moving along a linear scale.
  • The paw is placed on a small plinth under a cone-shaped pusher with a rounded tip, which does not hurt the animal (other shapes available on request).
  • The 37215 rat/mouse model features 3 force ranges from 0 to 250, 500, 750g.
  • The 37216 mouse model features 3 force ranges from 0 to 125, 250, 375grams.  Also includes a special chisel-shaped pusher (force applicator).
  • No calibration is required. Device is ready for immediate use.
  • Convenient hands-free foot pedal for starting or stopping application of the force.
  • Use of very low friction coefficient (slippery) Teflon prevents paw injury. If hind paw withdrawal threshold is reached, the animal can quickly remove its paw from the plinth.
  • Features a low voltage synchronous motor for low speed and optimum control.
  • A digital add-on is available as an option (force transducer plus display).
  • Upgrade kit for some older UB Analgesy-Meters. Ask for details!

Feature

Benefits 

Same instrument, three different force ranges

Applied force:

37215 from 0 to 250, 500, 750grams (with extra weights)

37216 from 0 to 125, 250, 375grams (with extra weights)

No calibration needed  Simple and reliable
Classic method since the 1960s  More than 1000 papers published!
NEW model with digital reading Upgrade kit for old UB Analgesy-Meters available
General
Power Consumption 15W
Operating Temperature 10° to 40° C
Sound Level Negligible

 

Operation

Start / Stop By Pedal Switch
37215 Force Range

From 0 to 250, 500, 750 grams

Force increasing rate Regulated by the Analgesy-Meter configuration
Power Requirements 115V 50/60Hz 230V 50/60Hz
Digital data recording Via optional Analgesy-Meter DAQ 37215-100

 

Physical

Total Weight 3.3 Kg 
Shipping Weight 5.4 Kg approx. 
Dimensions 46 x 16 x 14 cm 
Packing Dimensions 55 x 45 x 36 cm 

 

Warranty

Warranty 367215 / 37216 are covered by a 12-month warranty + 12 after product registration 
UB-Care Additional UB-Care can be added for other 12 or 24 months 

The Ugo Basile Analgesy-Meter has been designed to perform rapid and precise screening of analgesic drugs on the normal and inflamed rat/mouse paw. The instrument is basically a device which exerts an increasing force at a constant rate. This force is continuously monitored by a pointer moving along a linear scale or recorded on the digital interface upon model. The force is applied to the animal’s paw, which is placed on a small plinth under a cone-shaped pusher with a rounded tip.

The plinth is made of Teflon, which is biologically inert and has a very low friction coefficient. Thus, if the animal suddenly withdraws its paw, it slips out easily without being injured.

The operator depresses a pedal-switch to start the mechanism. When the animal reacts, it is free to leave the paw without any researcher action.

When the rat struggles, the operator releases the pedal and reads off the scale the force at which the animal felt pain.

37215 BUNDLE - Analgesy-Meter and Upgrade Kit for Rats - What's in the box?

37215-001 Electronic Unit
37215-303 Pedal Switch
37215-322 Standard Pusher
37215-323 2 Additional discs Disc M-LM 446
37215-326 Pusher (special chisel-shaped model)
37215-328 Complete Slide Assembly for 37215
37215-100 Analgesy-meter DAQ Upgrade Kit
E-AU 101 USB pen drive, including instruction Manual (on USB pen drive)

Optional 

37215-327 Mouse Kit, to transform the analgesymeter for rats into the analgesymeter for mice (including specific slide, 2 additional weights (50%) and 37215-326 pusher
Back to: Pain and Inflammation

Research insights

Preclinical research in pain and inflammation

Pain affects an estimated 20% of adults worldwide, with millions of new chronic pain cases diagnosed every year. Yet, it remains insufficiently addressed as a major public health issue. Recognizing pain as a complex condition influenced by biological, social and environmental factors is essential to improve research, prevention, treatment and health policies.

Developing safer and more effective pain management strategies requires a deeper understanding of the biological mechanisms underlying pain and inflammation. In this context, preclinical research plays a fundamental role in identifying therapeutic targets, evaluating novel treatments and generating evidence to support translation into clinical practice.

Most used paradigms for pain and inflammation research

Pain and inflammation research uses a combination of evoked and spontaneous paradigms to assess nociception, hypersensitivity, inflammatory responses and pain-related impairment in rodents. Evoked thermal paradigms include plantar stimulation, tail flick, hot/cold plate testing, thermal place preference and thermal gradient assessment, which are used to investigate heat sensitivity, cold sensitivity, thermal hyperalgesia, allodinya and thermal preference or avoidance.

Mechanical paradigms include dynamic plantar stimulation, electronic or manual Von Frey testing, paw pressure testing and direct joint pressure application, supporting the assessment of mechanical allodynia, hyperalgesia and joint hypersensitivity. Spontaneous pain paradigms include weight-bearing asymmetry, postural imbalance, vertical activity and gait or locomotor changes, which are particularly relevant in arthritis, neuropathic pain, bone cancer pain, post-surgical pain and inflammatory models.

Inflammation can also be evaluated as a dedicated endpoint through paw volume and oedema measurement, allowing researchers to quantify experimentally induced swelling and pharmacological treatment effects.

Specific pain conditions like the ones involving the Trigeminal nerve are assessed by dedicated devices for thermal and mechanical stimulation of the animal vibrissae area, during the Orofacial Test.

Key behavioral readouts in pain assessment

Pain and inflammation studies rely on behavioural readouts that quantify nociceptive thresholds, hypersensitivity, inflammatory responses and spontaneous pain-related behaviour. Key measured parameters include paw withdrawal latency after thermal stimulation, tail flick latency, vocalization, jumping, mechanical withdrawal threshold, force threshold, paw volume, oedema, hind paw weight distribution, thermal preference or avoidance, time spent in specific temperature zones, postural asymmetry and pain-related changes in locomotion or vertical activity.

These readouts help researchers assess hyperalgesia, allodynia, inflammatory pain, joint pain, neuropathic pain, post-surgical pain and treatment effects across different rodent models. By combining evoked responses with spontaneous behavioural endpoints, preclinical pain research can capture both stimulus-induced sensitivity and more naturalistic pain-related impairment. Ugo Basile’s pain portfolio includes instruments for thermal, mechanical, inflammatory and spontaneous pain assessment, including Plantar Test, Dynamic Plantar Aesthesiometer, Hot/Cold Plate, Electronic Von Frey, Plethysmometer, Librae Incapacitance Tester and Climbing Test.

Ugo Basile instruments for pain and inflammation research

Since 1963, Ugo Basile has supported pain and inflammation research with instruments designed to measure nociceptive thresholds, hypersensitivity, inflammatory responses and spontaneous pain-related behaviour in rodents.

Ugo Basile offers a complete portfolio of instruments for preclinical pain and inflammation research, covering thermal, mechanical, inflammatory and spontaneous pain-related endpoints.

Ugo Basile devices for thermal stimulation

The Plantar Test is used for thermal hyperalgesia studies through radiant heat stimulation of the hind paw and automatic paw-withdrawal detection. It is the gold standard for Thermal Hyperalgesia tests in unrestrained animals. The Tail Flick measures nociceptive thresholds to infrared heat stimulation of the tail and is especially suited to rapid, reflex-based analgesic screening with possibility to run repeated tests thanks to the lack of learning being the tail flick a reflexive response. The Hot/Cold Plate supports hot and cold sensitivity studies, including constant temperature, ramping and complex temperature protocols, while the Thermal Place Preference and Thermal Gradient Ring allow researchers to evaluate thermal preference and avoidance in freely moving animals. Both systems involve a cognitive component and in fact repeated tests on the same animal are subject to hyper- or hypo- responses due to previous test experience.

Orofacial Stimulation measures hypersensitivity to thermal (hot and cold) and/or mechanical stimulation of the orofacial area in rats (mouse adaptor available) and is used for research into a wide range of pain conditions involving the trigeminal nerve with no need to cut vibrissae.

Ugo Basile devices for evoked mechanical stimulation

For mechanical sensitivity, the Dynamic Plantar Aesthesiometer provides automated force application and paw-withdrawal scoring for mechanical allodynia studies, while the Electronic Von Frey and Von Frey Filaments support mechanical threshold assessment across different force ranges. The PAM – Pressure Application Measurement system is designed for joint pain and arthritis models, enabling direct quantifiable stimulation of rodent joints. However the PAM can also be used with specific applicators for other parts of the body from the paws to the back and spinal chord, etc. Analgesy-Meter is typically used for inflammatory conditions to measure to measure mechanical sensitivity and pain threshold of pressure applied on mic or rat paw for basic or applied research or phenotyping.

Ugo Basile spontaneous pain apparatus

The Climbing Test adds a vertical activity endpoint for spontaneous pain, motor function and activity-related studies. Librae Incapacitance Tester assesses hind paw weight distribution as an objective measure of spontaneous pain. Plethysmometer measures paw volume and oedema.

Frequently Asked Questions

What instruments are used to measure pain in rodents?

Rodent pain can be assessed using different instruments depending on the type of pain response being studied. Thermal pain is commonly measured with plantar stimulation systems, tail flick meters, hot/cold plates, thermal place preference systems and thermal gradient paradigms. Mechanical sensitivity is assessed with dynamic plantar aesthesiometers, electronic Von Frey devices, manual Von Frey filaments, paw pressure systems and joint pressure tools. Spontaneous pain and inflammation can be evaluated through weight-bearing asymmetry, paw volume measurement, gait analysis and activity-based readouts.